Sony DVP-NS400D Operating Instructions Manual page 27

Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
D
Logic) decoder and 3 to 6 speakers
This connection will allow you to enjoy the surround effects of the Pro Logic decoder on your
amplifier (receiver). If you have an AV amplifier (receiver) equipped with a Dolby Digital,
MPEG audio, or DTS decoder, refer to page 23.
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
Pro Logic uses a minimum of 3 speakers (front L and R, and rear (monaural)). The surround
effects are enhanced if 6 speakers (front L and R, centre, rear L and R, and subwoofer) are used.
If your amplifier (receiver) has L and R audio input jacks only, use
(receiver) has a digital input jack, use
xRecommended surround sound effects using this connection with your amplifier (receiver).
Dolby Surround (Pro Logic) (page 82)
z
For correct speaker setting location, please refer to the operating instructions of the amplifier (receiver).
CD/DVD player
DIGITAL OUT LINE 1 (RGB)-TV
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL OPTICAL
D-2
DIGITAL OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL OPTICAL
Optical digital cord
(not supplied)
Remove jack cap
before connecting
to coaxial or optical digital input
[Speakers]
Rear Rear
(L) (R)
Subwoofer
l: Signal flow
When connecting 6 speakers, replace the monaural rear speaker with a centre speaker, 2 rear speakers and a
subwoofer.
.
D-2
LINE 2
LINE OUT S VIDEO OUT
R-AUDIO-L VIDEO
Coaxial digital
cord (not supplied)
or
Dolby Surround amplifier (receiver)
Centre
5.1CH OUTPUT
FRONT REAR CENTER
L
WOOFER
R
Stereo
audio cord
(not supplied)
(white)
(red)
or
(white) (red)
to audio input
. If your amplifier
D-1
D-1
LINE OUT
R-AUDIO-L VIDEO
[Speakers]
Front Front
(L) (R)
Rear*
(mono)
27