Sony DVP-NS400D Operating Instructions Manual page 19

A
If you are connecting to a SCART (EURO AV) input jack
Connect the SCART (EURO AV) cord (not supplied). Be sure to make the connections firmly to
avoid hum and noise. When you connect using the SCART (EURO AV) cord, check that the TV
conforms to S video or RGB signals. Refer to the operating instructions supplied with the TV to
be connected. Also, when you set "LINE" to "S VIDEO" or "RGB" under "CUSTOM SETUP"
in the Setup Display (page 60), use a SCART (EURO AV) cord conforms to each signal.
B
If you are connecting to a video input jack
Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. You will
enjoy standard quality images.
Yellow (Video)
White (L)
Red (R)
Use the red and white plugs to connect to the audio input jacks (page 22).
C
If you are connecting to an S VIDEO input jack
Connect the S VIDEO cord (not supplied). You will enjoy high quality images.
If you are connecting to a VCR
Connect your VCR to the LINE 2 jack on the player. The VCR can record the signal only from
TV.
Notes
Do not connect the player to a VCR so that the signals of the player are passed to the TV via the VCR. If you do
so, you may not receive a clear image on the TV screen.
If you cannot view the pictures from a VCR through this player which is connected to a TV with RGB component
to t (Audio/Video) on your TV. When you select
jacks, set
signal from the VCR.
VCR
CD/DVD player
Connect
directly
Yellow (Video)
White (L)
Red (R)
TV
(RGB), the TV cannot receive the
continued
19