Settings For The Speakers (Speaker Setup) - Sony DVP-NS400D Operating Instructions Manual

Settings for the Speakers
(SPEAKER SETUP)
To obtain the best possible surround sound,
set the size of the speakers you have
connected and their distance from your
listening position. Then use the test tone to
adjust the volume and the balance of the
speakers to the same level.
This setting is effective when connecting the
speaker with 5.1 CH OUTPUT jacks (page
23).
Select "SPEAKER SETUP" in the setup
display. For details, see "Using the Setup
Display" (page 68).
The default settings are underlined.
To return to the default setting
Select the item, then press CLEAR.
xSIZE
Selects the size of the speakers to be
connected.
FRONT
LARGE Normally select this position.
SMALL When the sound cracks or the
surround sound effects are difficult to
hear, select this. This activates the
Dolby Digital bass redirection
circuitry and outputs the bass
frequencies of the front speaker from
the subwoofer.
CENTER
NONE
If you do not connect a centre speaker,
select this.
LARGE Normally select this position.
76
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
TEST TONE: OFF
FRONT:
CENTER:
LARGE ( REAR )
REAR:
SUBWOOFER:
SMALL When the sound cracks or the
REAR
NONE
LARGE (REAR/SIDE): Normally select this
SMALL (REAR/SIDE): When the sound
LARGE
LARGE
YES
* Rear speaker position (REAR/SIDE)
Correctly specify the location of the rear speakers to
enjoy the SURROUND effect.
Set to the "SIDE," if the location of the rear
speakers corresponds to section A below.
Set to the "REAR," if the location of the rear
speakers corresponds to section B below.
This setting affects only "VIRTUAL REAR
SHIFT," "VIRTUAL MULTI REAR," and
"VIRTUAL MULTI DIMENSION" mode (page
53).
surround sound effects are difficult to
hear, select this. This activates the
Dolby Digital bass redirection
circuitry and outputs the bass
frequencies of the centre speaker from
other speakers.
If you do not connect rear speakers,
select this.
position. Select either of these
according to the rear speaker's
position*.
cracks or the surround sound effects
are difficult to hear, select this.
Select either of these according to the
rear speaker's position*.
This activates the Dolby Digital bass
redirection circuitry and outputs the
bass frequencies of the rear speaker
from other speakers.
90
45
20