Carscop CCTR-809A User Manual page 12

and location information by SMS to the authorized phone number, also the tracker will call the authorized
number A first, if no answered then B and C, if 3 authorized all no answered, then stop calling, If the tracker is
triggered continually, every authorized phone will receive max 3 alarm SMS per hour.
The shock alarm SMS is as follow:
Shock Alarm
https://maps.google.com/maps?q=22.67680,114.15188
Battery:88%
Send SMS "SHOCKALARMOFF*123456" to the tracker, "SHOCKALARMOFF" is command, "123456" is
password, the tracker will send back the information "Set Shock Alarm OFF" to indicate the operation is
success and disable the shock alarm, After disable the shock alarm, the system will not check shock sensor
again.
Normally this function is used in working mode 2 & 3. Default the shock alarm is set to off.
6. Enable And Disable Overspeed Alarm (No Platform Necessary)
Send SMS "OVERSPEEDALARMON*123456*SSS" to the tracker number, "OVERSPEEDALARMON" is
command, "123456" is password, "SSS" is the setting alarm speed, unit is km/hour. The tracker will send back
the information "Set Overspeed Alarm On :SSS km/h" .
After enable overspeed alarm, the system will check the speed every 5 minutes. If the speed is higher
than the setting speed, the tracker will send alarm and location information by SMS to the authorized phone
number A (only send to A), The authorized phone will receive max 3 alarm SMS per hour, one hour later it will
be active again.
The overspeed alarm SMS is as follow:
Overspeed Alarm
Current Speed:110km/h,Setting:100km/h
Battery:88%
Send SMS "OVERSPEEDALARMOFF*123456*" to the tracker will disable the over speed alarm setting,
"OVERSPEEDALARMOFF" is command, "123456" is tracker password, the tracker will send back the
information "Set Overspeed Alarm Off " .
Normally this function is used in working mode 2 & 3. Default the over speed alarm is set to off.
7. Break Geo-fence Alarm (No Platform Necessary)
The geo-fence is a circle area on the map, the center of the circle is set by tracker current location (If the
tracker can not located by GPS, then the setting geo-fence command fail), and the radius is set by SMS. When
the tracker move out the area, the tracker will send alarm information to user by SMS.
Send SMS "GEOFENCEALARMON*123456*RRR" to the tracker number, "GEOFENALARMON" is
command, "123456" is password, "RRR" is the radius of the geo-fence circle (the center of the circle is the
tracker current location), unit is km, it is from 001 to 999. After receive the command, the tracker will locate
12
- -