Positioning The Digital Camera In The Waterproof Case - FujiFilm WP-FXA500 Owner's Manual

Positioning the Digital Camera in the
Waterproof Case
Before installation, check the following:
• To avoid loosing power while shooting underwater, check the remaining
battery power. If the remaining battery power is not enough, replace the
alkaline batteries with new ones, or the Ni-MH rechargeable batteries with
fully charged ones.
• Check how many new images can be stored on the xD-Picture Card.
• Remove the hand strap from the digital camera. Using the camera in the
waterproof case with its strap may cause the case to leak.
1
Turn the camera off.
2
Open the waterproof case (p.7) and set the camera in it.
3
Confirm the following before closing the waterproof case.
Waterproof sealing
4
When all is well, close the waterproof case (p.8).
Check that the camera's ! Power button and any parts can be correctly
→
operated using the controls on the housing.
Slip the camera into the waterproof
case until it stops securely.
• There is no dust, hair, or other
foreign particle on the waterproof
sealing, or on the edge face of the
waterproof case that engages with
the waterproof sealing.
• The camera is correctly seated and
aligned in the waterproof case.
EN-9