Preliminary Check Of The Case; Make A Preliminary Submersion Test On The Waterproof Case Before Positioning The Digital Camera - FujiFilm WP-FXA500 Owner's Manual

Preliminary check of the case

Make a preliminary submersion test on the waterproof case
before positioning the digital camera
Before installing the digital camera in the case, make sure that there is no
water leakage.
1
Check the outside of the waterproof case to make sure that there
are no cracks or faults with it.
2
Open the waterproof case.
3
Check the inside of the waterproof case for the following:
Waterproof sealing
➀
While sliding the lock lever down
( ), hold the top and bottom (the
position of no marks) of the
buckle grip and raise it up.
➁
Unlock the buckle hook to open the
waterproof case.
• Cracks (especially around the
waterproof sealing)
• Correct seating of the waterproof
sealing
• That the waterproof sealing has
no scratches or cracks, or that it is
oddly shaped, etc.
• Sand or foreign particles stuck to
the waterproof sealing
EN-7