Positioning the Digital Camera in the
Waterproof Case
Before installation, check the following:
• To avoid losing power while shooting underwater, charge the battery fully before
use.
• Check how many new images can be stored on the media.
• Remove the hand strap from the digital camera. Using the camera in the waterproof
case with its strap may cause the case to leak.
1
Turn the camera off.
• Raise the flash before the camera is set in the waterproof case.
2
Slide the flash pop-up switch to raise the flash.
For the operating instructions for the camera, such as the setting of flash mode,
see the Owner's Manual supplied with your camera.
EN-11