Enphase Q Cable Accessories - enphase IQ 7+ Installation And Operation Manual

Enphase Q Cable Accessories

The Enphase Q Cable is available with several accessory options for ease of installation, including:
•
Field wireable connectors (male): (Q-CONN-10M) Make connections from any Field Wireable
female connector
•
Field wireable connectors (female): (Q-CONN-10F) Make connections from any Q Cable open
connector or Field Wireable male connector
•
Enphase Q Aggregator: (Q-BA-3-1P-60) Aggregates up to three fully populated 20A branch
circuits and supports solar arrays of up to 11.5kWac with a single rooftop aggregator
•
Enphase raw Q Cable: (Q-12-RAW-200) 300 meters of 12 AWG cable with no connectors
•
Cable clips: (Q-CLIP-100) Used to fasten cabling to the racking or to secure looped cabling
•
Disconnect tool: (Q-DISC-10) Disconnect tool for Q Cable connectors, DC connectors, and AC
module mount
•
Q Cable sealing caps (female): (Q-SEAL-10) One needed to cover each unused connector on
the cabling
•
Terminator: (Q-TERM-10) Terminator cap for cut cable ends
28
IQ 7 / IQ 7+ / IQ 7X / IQ 7A Micro Installation and Operation
© 2020 Enphase Energy Inc. All rights reserved. 141-00043-03