Enphase Q Cable Accessories - enphase IQ 7 Micro Installation And Operation Manual

Enphase Q Cable Accessories

The Enphase Q Cable is available with several accessory options for ease of installation, including:
•
Enphase Q Aggregator: (Q-BA-3-1P-60) Aggregates up to three fully populated 20A branch
circuits and supports solar arrays of up to 11.5kWac with a single rooftop aggregator
•
Enphase Q Commercial Aggregator: (Q-BA-3-3P-35) Aggregates three fully populated Q Cable
branch circuits and outputs a single, three-wire branch circuit of 35A that can be installed on a
40A max OCPD.
•
Field wireable connectors (male): (Q-CONN-10M) Make connections from any Q Aggregator
open connector or Field Wireable female connector
•
Field wireable connectors (female): (Q-CONN-10F) Make connections from any Q Cable open
connector or Field Wireable male connector
•
Cable clips: (Q-CLIP-100) Used to fasten cabling to the racking or to secure looped cabling
•
Disconnect Tool: (Q-DISC-10) Disconnect tool for Q Cable connectors, DC connectors, and AC
module mount
•
Q Aggregator sealing caps (male): (Q-BA-CAP-10) Sealing cap for unused aggregator
connections
•
Q Cable sealing caps (female): (Q-SEAL-10) One needed to cover each unused connector on
the cabling
•
Terminator: (Q-TERM-10) Terminator cap for cut cable ends
29 © 2018 Enphase Energy Inc. All rights reserved.
IQ 7 / IQ 7+ / IQ 7X Micro Installation and Operation
141-00043-01