enphase IQ 7+ Installation And Operation Manual page 32

Topic
Standard warranty term
Compliance
Grounding
Monitoring
Communication
Integrated DC disconnect/
Integrated AC disconnect
32
IQ 7 / IQ 7+ / IQ 7X / IQ 7A Micro Installation and Operation
Enphase IQ7-60-2-US Microinverter Parameters
enphase.com/warranty
CA Rule 21 (UL 1741-SA) UL 62109-1, UL1741/IEEE1547,
FCC Part 15 Class B, ICES-0003 Class B, CAN/CSA-C22.2
NO. 107.1-01
This product is UL Listed as PV Rapid Shut Down
Equipment and conforms with NEC-2014 and NEC-2017
section 690.12 and C22.1-2015 Rule 64-218 Rapid
Shutdown of PV Systems, for AC and DC conductors, when
installed according manufacturer's instructions.
The DC circuit meets the requirements for ungrounded PV
arrays in NEC. Ground fault protection (GFP) is integrated
into the class II double insulated microinverter.
Enlighten Manager and MyEnlighten monitoring options.
Both options require an Enphase IQ Envoy
Power line communication (PLC)
The DC and AC connectors have been evaluated and
approved for use as the load-break disconnect required by
NEC 690.
© 2020 Enphase Energy Inc. All rights reserved.
Unit Min Typical Max
141-00043-03