Appliance Start-Up; Prolonged Closing; Technical Data; Uh -Caddy - CADDY PF01015 Installation And Operating Instructions Manual

28.7.

APPLIANCE START-UP

The start-up must be performed by a qualified technician. Make sure the installation is completed and the
oil tank has been filled up. The oil line must also have been purged.
CAUTION: CLOSE THE BLOWER COMPARTMENT ACCESS PANEL BEFORE STARTING THE
BURNER.
To change the kick-in point (AUX KIP) temperature of the fan in oil mode, go in SETUP, OPTIONS,
CONFIGURATION.
The temperature at which the fan shuts off (TEMP OFF) is unique for all heating systems. To change it, go
to SETUP, then WOOD SETUP.
28.8.

PROLONGED CLOSING

•
Cut off the electric circuit
•
Close the oil shut-off valve
NOTE: THE SHUT-OFF VALVE MUST BE CLOSED WHEN THE APPLIANCE IS OUT OF
SERVICE FOR A PROLONGED PERIOD OF TIME.

29. TECHNICAL DATA

29.1. UH –CADDY
BURNER BTU
MODEL
TYPE INPUT
UH–
BECKETT AFG 90,000
CADDY
UH–
RIELLO 40 F3 91,000
CADDY
For any additional information, consult the rating plate on the left hand side of the appliance.
76
NOZZLE FLOW HEAD
0
0.55 X 60 W 0.55 GAL US/H
L2
(DELAVAN) (2.08 L-H)
0
0.50 X 70 W 0.60 GAL US/H
---
(DELAVAN) (2.27 L-H)
STATIC PRESSURE H.P. FAN
PLATE AT THE PUMP MOTOR
140 PSI
YES 1/3
(965 kPa)
150 PSI
--- 1/3
(1035 kPa)
TUBULATOR AIR
ADJUSTMENT ADJUSTMENT
--- 0/2
1 2.5
EFFICIENCY
85%
87%