Preparing The T/B - Mitsubishi Electric MELFA RH-6SQH Series Instruction Manual

(3) Preparing the T/B

MODE
MANUAL AUTOMATIC
Ｔ／Ｂ背面
◇◆◇ Operating from the T/B ◇◆◇
Always set the [MODE] switch (mode selection key switch) on the front of the controller to "MAMNUAL", and
then set the T/B [ENABLE] switch to "ENABLE".
When the T/B is valid, only operations from the T/B are possible. Operations from the controller or external
signals will not be accepted.
Next, prepare to use the T/B
1) Set the [MODE] switch on the front of the controller to "MANUAL".
2) Set the T/B [ENABLE] switch to "ENABLE". The menu selection
screen will appear.
The following operations are carried out with the T/B.
Up: Disable
上：DISABLE
Down: Enable
下：ENABLE
(Lighting)
*ランプ点灯
2Unpacking to Installation
Setting the origin 2-24