Advertisement
23001 Industrial Blvd, Rogers, MN 55374 / 1-866-527-7637
MOTOALLIANCE WINCH MOUNT
Thank you for purchasing our MotoAlliance winch mount. You now own a
premium custom winch mount allowing you to use your winch with your ATV /
SxS. Please note the following instructions and heed all warnings.
• Please use common sense when operating your ATV / SxS
• Read your Winch Operator's Manual and all other Operator Manuals
including warning labels, before operating your ATV / SxS
• Be observant of moving parts causing entanglement use extreme caution!
SEVERE INJURY OR DEATH MAY RESULT IF YOU ARE NEGLIGENT.
866.527.7637
www.motoalliance.com
MA11955
CFMOTO C-Force
1
motoinfo@motoalliance.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Motoalliance MA11955
Summary of Contents for Motoalliance MA11955
- Page 1 MOTOALLIANCE WINCH MOUNT MA11955 CFMOTO C-Force Thank you for purchasing our MotoAlliance winch mount. You now own a premium custom winch mount allowing you to use your winch with your ATV / SxS. Please note the following instructions and heed all warnings.
- Page 2 MotoAlliance MA11955 CFMOTO C-Force 23001 Industrial Blvd Rogers, MN 55374 866.527.7637 Please verify that all hardware and parts are included in your package. Kit Content: Item Number Description Quantity MA11955-1 Main Bracket MA11955-3 Winch Spacer MA11955-2 Mount Spacer 3/8”-16 x 1” Serrated Flange Bolt 3/8”-16 Serrated Flange Nut...
- Page 3 MotoAlliance MA11955 CFMOTO C-Force 23001 Industrial Blvd Rogers, MN 55374 866.527.7637 1. Remove the four bolts that hold the front fascia to the bumper as shown in Fig 2. Figure 2 2. Once the cavity behind the bumper is accessible set all hardware aside to be reinstalled later.
- Page 4 23001 Industrial Blvd Rogers, MN 55374 866.527.7637 4. Attach the winch to the MA11955-1 Main Mounting Plate using the provided M8 hardware and the MA11955-3 Winch Mounting Spacers as shown in Figure 4. Figure 4 5. Slide the winch and mount inside the bumper cavity and align the outer holes on the winch mount with the available mounting holes on the machine.
- Page 5 MotoAlliance MA11955 CFMOTO C-Force 23001 Industrial Blvd Rogers, MN 55374 866.527.7637 7. After the winch is fully installed, reattach the cable to the winch. Leave the cable unwound as it will be wound under load to properly set the cable.
Need help?
Do you have a question about the MA11955 and is the answer not in the manual?
Questions and answers