Motoalliance MA11918 Manual

Winch mount for honda pioneer 700

23001 Industrial Blvd, Rogers, MN 55374 / 1-866-527-7637

MOTOALLIANCE WINCH MOUNT

Thank you for purchasing our MotoAlliance winch mount(s). You now own a

premium custom winch mount which allows you to use your winch with your UTV

/ SxS. Please note the following instructions and heed all warnings.

• Please use common sense when operating your UTV / SxS

• Read your Winch Operator's Manual and all other Operator Manual's,

including warning labels, before operating your UTV / SxS

• Be observant of moving parts causing entanglement, use extreme caution!

SEVERE INJURY OR DEATH MAY RESULT IF YOU ARE NEGLIGENT.

866.527.7637

www.motoalliance.com

MA11918

Honda Pioneer 700

motoinfo@motoalliance.com

Table of Contents

Need help?

Do you have a question about the MA11918 and is the answer not in the manual?

Page 1 MA11918 Honda Pioneer 700 Thank you for purchasing our MotoAlliance winch mount(s). You now own a premium custom winch mount which allows you to use your winch with your UTV / SxS. Please note the following instructions and heed all warnings.
Page 2 MotoAlliance MA11918 Honda Pioneer 700 Winch Mount 23001 Industrial Blvd Rogers, MN 55374 866.527.7637 Please verify that all hardware and parts are included in your package. Kit Content: Item Description MA11918 Pioneer Winch Mount 5/16’’ U Bolt (42018) 5/16’’ Nylock Nut 5/16’’...
Page 3 MotoAlliance MA11918 Honda Pioneer 700 Winch Mount 23001 Industrial Blvd Rogers, MN 55374 866.527.7637 Grommet into the larger hole located at the top of the winch mount and on the Driver’s side. 3) Remove the (4) 5/16’’ bolts that hold the top two bumper supports and the (2) lower side bumper supports.