Intelligent Wireless Data - NEC MultiSync UX552 User Manual

PD LIST Information
Click on "PD LIST" on the left column below HOME.
Shows a list of monitor IDs and IP addresses of multiple monitors which are daisy-chained.

NOTEE:
Only the master monitor can show the list.
MEMO Settings
Click on "MEMO" on the left column below HOME.
Use the MEMO settings to define text that can be viewed on-screen when a user selects MEMO in the OSD menu. For example,
if you want to provide contact information for customer service at your company, that information can be entered here.
Note that the MEMO text cannot be set from the monitor's OSD menu using the remote control. The MEMO text must be added
in the fields in this section. The message is displayed on the monitor screen.
TITLE The title must be max. 24 characters long.
MESSAGE A message must be max. 240 characters long.
MEMO PASSWORD The default is "0000".
MEMO PASSWORD A MEMO PASSWORD is required when selecting MEMO PASSWORD ENABLE.
ENABLE
SD-CARD VIEWER setting
Click "SD-CARD VIEWER" on the left side of HOME.
Please refer to Using SHARED SD card SETTINGS. See

Intelligent Wireless Data

This function can be used to get the monitor status via wireless communication, even when the main power off. Some of the
OSD options can also be set using this method.
To use this function it must be turned on in the OSD settings [DISPLAY PROTECTION]
the wireless app must be installed on a compatible mobile device. This function is enabled by default. At this time, the mobile
application is only available for Android devices. Please refer to the NEC website for more information.

NOTEE:
• Sensor position: See

• Please contact your supplier for detailed information.

• Complied with ISO 15693.
Function name
Setting Copy
Setting read and write function
Display information
Security Setting
page
page 19 and page 20.
63.
English−88
➙
[INTELLI.WIRELESS DATA], and