Figure 2: Rear Panel - Edge-Core ECS4510-12PD Installation Manual

Figure 2: Rear Panel

1 RJ-45 Console Port
1
Console Port
The RJ-45 connector on the rear panel that is labeled "Console" provides an out-of-
band serial connection to a terminal or a PC running terminal emulation software.
The port can be used for performing switch monitoring and configuration. For
more information, see
DC Power Socket
The switch requires a DC power source. For more information on the switch power
input, how to connect it, and how to power-on the switch, see
Switch to an External DC Power Source" on page
Cooling Fans and Vents
The switch must be installed in a properly cooled and ventilated environment. For
more information, see
2 DC Power Socket
"How to Connect to the Console Port" on page
"Switch Cooling Requirements" on page
– 11 –
Chapter 1
| Switch Description
2
44.
"Connecting the
28.
26.
Overview