Wps - TP-Link WR841HPV5 User Manual

Chapter 5
5. 4. 2.

WPS

WPS (Wi-Fi Protected Setup) can help you to quickly and securely connect to a wireless
network. This section will guide you to add a new wireless device to your router's
network quickly via WPS.
Note:
The WPS function cannot be performed if the wireless function of the router is disabled. Please make sure the wireless
function is enabled before configuration.
1. Visit http://tplinkwifi.net, and log in with the default username and password:admin.
2. Go to WPS.
3. Follow one of the following three methods to connect your client device to the
router's Wi-Fi network.
Method ONE: Press the WPS Button on Your Client Device
1. Keep the WPS Status as
2. Select Press the WPS button of the new device in two minutes
3. Within two minutes, press the WPS button on your client device.
4. A success message will appear on the WPS page if the client device has been
successfully added to the router's network.
Enabled and click Add
Configure the Router in Access Point Mode
Device.
and click Connect.
76