Table of Contents
Advertisement
Chapter 4
4. 16. 5. Factory Defaults
1. Visit http://tplinkwifi.net, and log in with the default username and password: admin.
2. Go to
System Tools
default values.
•
The default Username: admin
•
The default Password: admin
•
The default
IP
•
The default
Subnet
4. 16. 6. Backup & Restore
The configuration settings are stored as a configuration file in the router. You can
backup the configuration file in your computer for future use and restore the router to
the previous settings from the backup file when needed.
1. Visit http://tplinkwifi.net, and log in with the default username and password: admin.
2. Go to
System Tools
¾ To backup configuration settings:
Click
Backup
to save a copy of the current settings in your local computer. A ".bin" file
of the current settings will be stored in your computer.
¾ To restore configuration settings:
1. Click
Choose File
to locate the backup configuration file stored in your computer, and
click Restore.
2. Wait a few minutes for the restoring and rebooting.
Note:
During the restoring process, do not power off or reset the router.
>
Factory
Defaults. Click
Address: 192.168.0.1
Mask: 255.255.255.0
>
Backup &
Restore.
Configure the Router in Standard Wireless Router
Restore
to reset all settings to the
68
Advertisement
Table of Contents
