Table of Contents
Advertisement
Chapter 4
PPPoE
If your ISP provides PPPoE connection, select PPPoE.
•
User Name/Password
These fields are case-sensitive.
•
Confirm Password
password you entered is correct.
•
Secondary Connection
an extra connection type, select
connection.
•
WAN Connection Mode
•
Connect on Demand
automatically after a specified inactivity period (Max Idle Time) and be re-
established when you attempt to access the internet again. If you want to keep
your internet connection active all the time, please enter 0 in the
field. Otherwise, enter the number of minutes you want to have elapsed before
your internet access disconnects.
•
Connect Automatically
when it is down.
•
Time-based Connecting
from the start time to the end time (both are in HH:MM format).
•
Connect Manually
immediately. This mode also supports the
on Demand
mode. The internet connection can be disconnected automatically
- Enter the user name and password provided by your ISP.
- Enter the Password provided by your ISP again to ensure the
- It's available only for PPPoE connection. If your ISP provides
Dynamic IP
- In this mode, the internet connection can be terminated
- The connection can be re-established automatically
- The connection will only be established in the period
- You can click
Connect/Disconnect
Configure the Router in Standard Wireless Router
or
Static IP
to activate the secondary
to connect/disconnect
Max Idle Time
Max Idle Time
function as
Connect
21
Advertisement
Table of Contents
