TP-Link WR841HPV5 User Manual page 9

Chapter 1
The router's LEDs (view from left to right) are located on the front panel. You can check
the router's working status by following the LED Explanation table.
LED Explanation
Name
RE
Wi-Fi
PWR
WAN
LAN
WPS
Status
The router is connecting to the host wireless network. This may take
Blinking
up to 2 minutes.
The router is connected to the host wireless network, and it is working
On
in Range Extender mode.
On The wireless band is enabled.
Off The wireless band is disabled.
On Power is on.
The system is starting up or firmware is being upgraded. Do not
Blinking
disconnect or power off the router.
Off Power is off.
Blue On The internet is available.
Orange On The router's WAN port is connected, but the internet is not available.
Off The router's WAN port is not connected to a powered-on device.
On At lease one LAN port is connected to a powered-on device.
Off No LAN port is connected to a powered-on device.
This light remains on for 5 minutes when a WPS connection is
On/Off
established, and then turns off.
Blinking WPS connection is in progress. This may take up to 2 minutes.
Get to Know About Your Router
Indication
4