TP-Link WR841HPV5 User Manual page 120

host router is 192.168.0.1, the IP address of the extended router should be
192.168.0.2~192.168.0.254. Here we take 192.168.0.2 for example).
2 ) Click Save.
Note: Log in to the web management page again if the IP address of the router has been altered.
3. Survey the SSID to be bridged:
1 ) Go to Wireless
2 ) Click Survey, locate the host router's SSID and click
TP-Link_2512 for example).
3 ) If the host router is set with a wireless password, you should enter its wireless
password.
4 ) Click Save.
4. Disable DHCP: Go to DHCP, select Disable, and click Save.
Now you can go to
means WDS bridging is successfully built.
> Wireless Settings
Status to check the WDS status. When the
and click Enable WDS Bridging.
Choose (here we take
WDS status is Run, it
115