Chapter 4
4. 3.
Network
4. 3. 1.
WAN
1. Visit http://tplinkwifi.net, and log in with the default username and password: admin.
2. Go to
Network
> WAN.
3. Configure the IP parameters of the LAN and click Save.
Dynamic IP
If your ISP provides the DHCP service, please select
automatically get IP parameters from your ISP.
Click
Renew
to renew the IP parameters from your ISP.
Click
Release
to release the IP parameters.
•
MTU Size
- The normal MTU (Maximum Transmission Unit) value for most Ethernet
networks is 1500 Bytes. It is not recommended that you change the default MTU size
unless required by your ISP.
•
Use These DNS Servers
Use These DNS Servers
the DNS servers will be assigned dynamically from your ISP.
•
Host Name
- This option specifies the name of the router.
Configure the Router in Standard Wireless Router
- If your ISP providess you one or two DNS addresses, select
and enter the primary and secondary addresses. Otherwise,
Dynamic
IP, and the router will
19