Download Print this page
Silicon Laboratories Si5-EVB Series Manual
Silicon Laboratories Si5-EVB Series Manual

Silicon Laboratories Si5-EVB Series Manual

Single/dual frequency xo/vcxo evaluation board

Advertisement

Quick Links

S
5
S
I
X X
I N G L E
E
V A L U A T I O N
Description
The Silicon Laboratories Si5xx evaluation board
contains the hardware needed for evaluation of the
Si5xx Single/Dual Frequency XO/VCXO.
Note: The Si5xx-EVB is not populated with an Si5xx XO or
VCXO. These devices must be ordered separately. Go
to
www.silabs.com/VCXOPartnumber
device and/or to order samples.
Function Block Diagram
Power In
J12
VCO input
Rev. 0.1 3/11
/ D
F
U A L
R E Q UE N C Y
B
O A R D
to configure a
J1
Filter
J4
Copyright © 2011 by Silicon Laboratories
X O / V C X O
Features
Evaluation of Silicon Laboratories' Si5xx Single/Dual
Frequency XO/VCXO
Voltage control (VC) input port (Si515, Si516)
Supports frequencies up to 1.4 GHz (using Si53x/
55x)
Dual footprint supports 3.2 x 5 or 5 x 7 mm
6 (4)
VDD
1 (1)
4 (3)
NC/FS/VC/OE
CLKP
5
2
NC/FS/OE
CLKN
GND
3 (2)
Note: pin numbers in parentheses represent
pin numbers for the 4-pin device
J5
Si5xx- EV B
J3
Output
Conditioner
J2
Si5xx-EVB
CLKP
CLKN

Advertisement

loading
Need help?

Need help?

Do you have a question about the Si5-EVB Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Silicon Laboratories Si5-EVB Series

  • Page 1 R E Q UE N C Y V A L U A T I O N O A R D Description Features The Silicon Laboratories Si5xx evaluation board  Evaluation of Silicon Laboratories' Si5xx Single/Dual contains the hardware needed for evaluation of the Frequency XO/VCXO Si5xx Single/Dual Frequency XO/VCXO.
  • Page 2 Si5xx-EVB 1. Introduction This document describes the operation of the Silicon Laboratories Si5xx evaluation kit. The Si5xx-EVB kit refers to the evaluation board hardware intended for customer evaluation of the Si5xx single/dual frequency XO/VCXO. The Si5xx-EVB kit contains the following: ...
  • Page 3: Top/Bottom Views Of Board

    Si5xx-EVB 2. Top/Bottom Views of Board Figure 1. Top (Left) and Bottom (Right) Board Views Rev. 0.1...
  • Page 4: Functional Description

    Si5xx-EVB 3. Functional Description The Si5xx-EVB is the evaluation board assembly for the Si5xx single/dual frequency XO/VCO. This evaluation board assembly provides access to all signals for operating the device. The Si5xx-EVB schematics, bill of material, and PCB layouts are included as sections 4, 5, and 6, respectively. Figure 2 provides a block diagram for the board.
  • Page 5 Si5xx-EVB 3.3. Si5xx-EVB Voltage Control Signal An external voltage control signal may be applied to the control voltage modulation input at the J12 header (VC). This voltage supplies the control voltage or voltage modulation input to the DUT. See Section 3.2 on how to configure the jumpers and VC enable resistors (R6 and R7).
  • Page 6 Si5xx-EVB 4. Configuring the Si5xx-EVB 1.8-3.3 V Power Supply Frequency Counter Optional Voltage Source (for Si515, Si516) Optional Oscilloscope Si5xx-EVB or other Instrument CLKN CLKP Figure 3. Si5xx-EVB Typical Configuration Rev. 0.1...
  • Page 7 Si5xx-EVB 5. Schematic Rev. 0.1...
  • Page 8: Bill Of Materials

    Si5xx-EVB 6. Bill of Materials Table 4. Si5xx-EVB Bill of Materials Item Catty Reference Value Manufacturer PN PCB Footprint C1,C2,C4,C 100N Venkel C0603X7R160- SM_C_0603 5,C6,C7 104KNE Phoenix_2_scr Phoenix MKDSN 1.5/2-5.08 Phoenix2pinM_p2pitch J2,J3 edge mount Johnson 142-0701-801 SMA_EDGE_p062 J4,J5 1by2_M_Hdr Salines Don't care Thru-hole, .1"...
  • Page 9 Si5xx-EVB 7. Layout Figure 5. Layer 1: Primary Side Rev. 0.1...
  • Page 10 Si5xx-EVB Figure 6. Layer 2: GND Rev. 0.1...
  • Page 11 Si5xx-EVB Figure 7. Layer 4: PWR Rev. 0.1...
  • Page 12 Si5xx-EVB Figure 8. Layer 4: Secondary Side Rev. 0.1...
  • Page 13 Si5xx-EVB OTES Rev. 0.1...
  • Page 14: Contact Information

    Silicon Laboratories products are not designed, intended, or authorized for use in applications intended to support or sustain life, or for any other application in which the failure of the Silicon Laboratories product could create a situation where per- sonal injury or death may occur.

This manual is also suitable for:

Si510-evbSi511-evbSi512-evbSi513-evbSi515-evbSi516