Calypso Nmea Connect Plus User Manual page 7

3.3 ULTRASONIC Wired or ULP485 to BLE and to NMEA 2000
If you have a Calypso Ultrasonic Wired or ULP485 and want to monitor the wind data
in your NMEA 2000 navigation instruments and also in your BLE devices the NCP
'W2000' model is your best option.
The NCP will receive the NMEA 0183 wind sentences from your Ultrasonic via cable
and export it to the NMEA 2000 network.
N2K
Display
3.4 Flexible interfaces
The most versatile option is to use the High End. This gateway will allow you to
connect any Ultrasonic within Calypso´s range of products to the NCP and convert
the wind data into any of the outputs available (NMEA 0183, NMEA 2000, BLE, WIFI).
BLE
BLE
NMEA 0183
NMEA 2000 Backbone
NCP
BLE to N2K
NMEA 2000 backbone
NCP
Wired to BLE+N2K
N2K
Display
BLE