7 Website
The NCP has integrated a Website which allows get information of the device, get the
status of the device and configure it.
To access it, make sure you have connected your PC or device to your NMEA Connect Plus
Access Point via Wi‐Fi (see section 5.7 -WIFI‐Access Point- for further details) or the NCP is
connected via Wi‐Fi to your network (see section 5.8 and 8.1).
When connecting to the NCP Access Point, the NCP IP address is the 192.168.4.1. If it is
connected to your Wi‐Fi network, the IP address will be the one you had configured
previously.
You can now access the NCP Website from any web browser. Enter the IP address into the
address bar and you will be shown the NCP home page:
POWER
GND
SUPPLY
+12V