Firmware Upgrade; Troubleshooting - Calypso Nmea Connect Plus User Manual

Hide thumbs Also See for Nmea Connect Plus:
Table of Contents

Advertisement

Max Output power
Antenna
Range
Security
Mechanical:
Size
Weight
Housing Material
Cable Diameter
Housing Cert
Environmental
Parameter
IP Rating
Operating Temperature
Electrical rating enclosure

10 Firmware Upgrade

The NCP is easily upgradable using a simple Microsoft Windows user interface program
running on a connected PC. The upgrade can be performed with the unit completely in‐situ,
via a PC connected to the USB port.
Please contact
www.calypsoinstruments.com

11 Troubleshooting

If you find any problem in the installation or operation of the device, please follow the next
steps to check it.
11.1 Power
Check the Green led inside the NCP is glowing when the NCP is powered. If not,
check the power connections are right.
If connected to NMEA 2000 network, check the connections are right (section
6.2), the NCP is connected to the NMEA 2000 backbone and this is powered.
2
To achieve this level of water integrity all glands must be occupied by round-section cables of
between 4.5mm and 10mm or be replaced by blanking plugs.
20 dBM
Integrated internal antenna
100 m (open space)
WPA/WPA2/WEP
93.3mm x 112.54mm x 35.30mm (LxWxH)
100gr.
Policarbonate 94V‐2
3 holders (4‐8mm & 8‐12mm & 10‐14mm)
TUV ,CE,ROHS
Value
2
IP68
(outdoors & underwater)
‐40ºC ‐ 80ºC
450 V
for more information

Advertisement

Table of Contents
loading

This manual is also suitable for:

High endCmi1016Bt0183Bt2000W2000

Table of Contents