Product Overview - Calypso Nmea Connect Plus User Manual

1

1 Product overview:

Congratulations, you are the owner of a brand new NMEA Connect Plus. The NMEA Connect
Plus (NCP along the document) product line belongs to a family of gateways and range
extenders.
The NCP lets you connect any ultrasonic wind meter (wired or Portable) from Calypso´s portfolio
to an NMEA 0183 or NMEA 2000 network, and/or extend your Bluetooth and WIFI signal range.
It will translate your wind data to the desired output interface.
Moreover, the Bluetooth transmission allows up to two Bluetooth devices to be connected at
the same time, considering the NCP a great solution to access your wind data simultaneously in
several Bluetooth tablets, smartphones, smart watches, PCs, etc...
The NCP is a very simple device to install and use. You only need to connect the NCP to an
NMEA0183 network and the power supply, or only needs to be connected to an NMEA2000
network (in this case the network is already self‐powered).
Easy to configure via Webserver and Upgradable via USB.
The following image shows the different connectivity options:
1 Applicable to Hardware Version V5, and for Firmware Version V1.11 and higher.