Table of Contents
Advertisement
8 Configuration:
Access the Configuration page to modify the desired parameters.
Important: after making any change along the configuration you must click the SAVE button
and then RESET the device.
8.1 WIFI STATION CONFIGURATION, and IP CONFIGURATION
This section is used to configure the NCP to connect to your Wi-Fi network.
The NCP can be configured as Wi‐Fi Station to connect your network Access Point.
To configure it you have to introduce the Wi‐Fi SSID and password of your Access
Point. Also you should assign a manual IP configuration; this will be the IP of the NCP
in your Wi-Fi network.
After changing the configuration you must click the SAVE button and then reset the
device.
8.2 BLE CONFIGURATION
In this section you can select which BLE device you want to connect with. You should
introduce the MAC address of your ULTRASONIC BLE with the following format:
Advertisement
Table of Contents
