Calypso Nmea Connect Plus User Manual page 25

After changing the configuration you must click the SAVE button and then reset the
device Then the following page will appear:
In the case no MAC is configured, the NMEA Connect Plus will connect the first
ULTRASONIC BLE device detected.
8.3 NMEA 0183 CONFIGURATION
In this section you can configure each NMEA 0183 port as input or output; also you
can select the Baudrate.
In models with Wi‐Fi, you can configure here the Wi‐Fi TCP port you want to use as
NMEA 0183 Wi‐Fi server Port.