Table of Contents
Advertisement
•
If powered by USB, check the connections are right (section 6.1) and it's
properly powered.
•
If powered by the dedicated power, check the connections are right (section
6.4), and the power supply is connected and turned on.
11.2 Model
Check your NCP Model is the one you need. Connect the Website 'Information page'
(see section 7.1) , get the Model information and check this model has the
functionalities you need (section 2).
Also on the 'Status page' the functionalities that are active are indicated.
11.3 Wind source
Check the NCP is receiving wind data from the desired source, by visiting its Website
'Status page'.
•
If you have connected a Wired ULTRASONIC (ULTRASONIC Wired Standard,
Wired BLE, Wired WIFI or ULP 485) into N0183 input, the 'Status' should
show in the N0183 interface that is receiving in that input:
If not receiving from the N0183 interface, is probably because the Wired
ULTRASONIC isn't correctly connected to the NCP or it isn't powered . Make
sure the Wired ULTRASONIC is powered, the connection is made at an input
RS485 port (visit the 'Configuration page' to check the NMEA 0183 Ports
Configuration), and the cables are properly connected (section 6.3)
You also can look on the 'Status page', if the NCP is receiving from a BLE
source. If true, check the MAC address it's receiving from, maybe if you are
using an ULTRASONIC Wired BLE the NCP is connecting the BLE source of the
ULTRASONIC or you have any ULTRASONIC PORTABLE near (take into
account that PORTABLEs are always on, even if they are unused in their
packaging, and can reach distances of 50m)
In case your wind source is a ULTRASONIC Wired BLE, you can check
Ultrasonic is sending data by connecting by Bluetooth using the mobile App
Anemotracker. Keep in mind that to connect the Ultrasonic no other device
(NCP, other mobile device, ..) must be connected to it.
•
If you are using an ULTRASONIC BLE (ULTRASONIC Portable or Wired BLE) ,
the 'Status' should shown in the BLE interface that is receiving BLE data and
Advertisement
Table of Contents
