Fault Code List - Asko DC7794 User Manual

FAULT CODE LIST

Describes the relevant fault codes for this product.
Nr. Name
FAULT 03 Fault in moisture
sensor
FAULT 04 Maxtid process
FAULT 06 Check water pump
FAULT 12 Timeout
communication
To reset the alarm, press and hold the START/STOP button for 5 seconds.
Description
Sensor is outside its range
Maximum time for drying process
exceeded (the preset value 180 min can
be changed using parameter P 2073).
The high water level in the tray has
activated the switch for the float.
The communication between the user
interface and electronics has been
temporarily interrupted.
37