Related Manuals for Asko DC7784HP
Summary of Contents for Asko DC7784HP
-
Page 1: User Manual
USER MANUAL Drying cabinet DC7784HP DC7794HP Read the user manual before using the machine... - Page 2 ASKO offers you all these features. When you buy an ASKO product you can be sure that the inside is just as good as the outside and that the ethics and morality that go into building this product are just as high as the quality and function you are getting.
-
Page 3: Table Of Contents
CONTENTS THIS USER MANUAL START-UP IMPORTANT SAFETY INFORMATION 5 OPERATION FOR A GOOD ENVIRONMENT User tips Drying programmes Packaging materials Selection of drying programme Management of end-of-life drying cabinet Child lock DESCRIPTION OF THE DRYING CABINET 7 Starting drying programme Air flow in the cabinet Ending drying programme CONTROL PANEL... -
Page 4: This User Manual
THIS USER MANUAL The contents of this user manual describe function, operation and optimisation of drying programmes, as well as instruc- tions for installation and maintenance. Alongside the User Manual there is a Service Manual. -
Page 5: Important Safety Information
If the power cord is damaged, it must be immediately replaced, and this must be done only by the manufacturer, the manufac- turer's service agent or similarly qualified persons in order to prevent danger. Follow ASKO instructions in repair and replacement of parts. -
Page 6: For A Good Environment
FOR A GOOD ENVIRONMENT PACKAGING MATERIALS MANAGEMENT OF END-OF- LIFE DRYING CABINET The packaging that protects the drying cabinet against damage in transit has been When the drying cabinet has reached the chosen with concern for the environment in end of its useful life, it must be taken to a mind and is therefore recyclable. -
Page 7: Description Of The Drying Cabinet
DESCRIPTION OF THE DRYING CABINET The ASKO DC7784HP and DC7794HP dry- The cabinet is a completely enclosed ing cabinets operate according to the heat system. No exhaust-air connection is re- pump principle with a dehumidifier instead quired. The moisture condenses during of a conventional hot-air unit. -
Page 8: Air Flow In The Cabinet
AIR FLOW IN THE CABINET Air intake in 6 rows of holes Cleaning fi lter below the shoe rack Air return after dehumidifi cation Enters a duct in the back of the drying cabinet Dehumidifi er _____________________________ Make sure that shoes and similar items do not block the airflow. -
Page 9: Control Panel
CONTROL PANEL DISPLAY ON / OFF The display has two rows with 6 characters on each row. During the drying process the selected drying OK/START/STOP programme and a rolling bar indicat- ing that the process is in progress are shown. UP ARROW DOWN ARROW FUNCTION OF THE BUTTON... -
Page 10: Language Setting
CONTROL PANEL LANGUAGE SETTING The following languages can be handled: English, Swedish, Norwegian, Danish, Finnish, Italian, French, German, Spanish, Portuguese and Dutch. Make sure that the main ON/OFF Step through to the desired language with the UP ARROW or DOWN AR- switch on the drying cabinet is off. -
Page 11: Placement
PLACEMENT There must be an earthed socket within a distance of 2 m from the lower part of the drying cabinet. The drying cabinet has a 2 m long earthed lead with a plug connect- ed at the bottom. The power socket should be located such that there is no need for an extension cable. -
Page 12: Unpacking
UNPACKING _________________________________ ____________________________________ Check that all transport securing Check to make sure that the product has devices have been removed before not been damaged in transit. Any dam- connecting the drying cabinet. age incurred in transit must be reported _________________________________ to the dealer within 7 days. -
Page 13: Rehanging Of Door
REHANGING OF DOOR The pictures below illustrate rehanging from right-hung door to left-hung. Rehanging kit For rehanging, a rehanging kit must be ordered from the supplier of the cabinet. The kit consists of a new upper hinge, as the left and right hinges are not interchange- able. - Page 14 Reconnection in the door Lay the door down with the inside facing up on a non-damaging surface. Detach the inner plate (5) with magnetic strips, glove hangers and, if applicable, door hangers. Screws are beneath the magnetic strips. Move the insulation into position(6).
- Page 15 Lay the door in position Before laying the door in position, remove the lower hinge with pin and washer and lay it aside. Screw back the fixing bolts as they con- tribute to the stability of the cabinet. Screw back Lower the retaining hinge...
- Page 16 Lower hinge mirror- inverted Transfer the hinge to the other side. The hinge must be mirror-inverted and the hinge pin must be unscrewed and refitted on the other side of the hinge. Make sure that the hinge pin is tightened fi rmly. Transfer the door handle Transfer the handle (9) to the other side.
-
Page 17: Condensation Water
CONDENSATION WATER Condensation water may be removed in two ways, collected in a detachable water tank or via a hose to the floor drain. DETACHABLE WATER TANK _____________________________ The water tank is designed to be suffi- ciently large for a complete wash by a comfortable margin. -
Page 18: Connection To Floor Drain
CONNECTION TO FLOOR DRAIN The drying cabinet is supplied from the factory with a hose to the detachable water tank. To change to removal of condensation water to the floor drain, proceed as follows: Hose to the de- tachable water tank Cabinet viewed from rear Position the drain hose in one of the... -
Page 19: Reconnection To Water Tank
Route the drain hose to the drain. If the drain is higher than the outlet on the cabinet, make sure that the hose runs to the floor in an arc and forms a trap. There is otherwise a risk of the condensation water flowing back to the tray when the pump is not working. -
Page 20: Installation
INSTALLATION POSITIONING/ATTACHMENT ____________________________________ The drying cabinet is intended only for location indoors in a dry place. ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ ____________________________________ Fixing bracket The drying cabinet must not be placed in an environment in which high-pressure water is used for cleaning. ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ LEVELLING The drying cabinet must be level on a flat surface, resting on all four feet. -
Page 21: Electrical Connection
ELECTRICAL CONNECTION The drying cabinet must be connected to a 230 V single-phase 50 Hz and pro- tectively earthed wall socket. The drying cabinet is supplied ready for connection with a cable and an earthed plug. ________________________________ The drying cabinet should be connected to an earthed wall socket using the con- necting cable supplied and must not be permanently wired. -
Page 22: Start-Up
START-UP ____________________________ ________________________________ CAUTION Read this User Manual be- fore using the drying cabinet Read the safety instructions on page 5 for the first time. before using the cabinet. ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ ___________________________________ Make sure that the cabinet is firmly attached to the wall. See page 20. Make sure that no packaging mate- rial has been left behind. -
Page 23: Operation
OPERATION There are three sections with hangers in the cabinet. Each section has a number of rails for hanging items to dry. Hang the items in the drying cabinet according to how much space they require - not according to their weight. ... -
Page 24: User Tips
USER TIPS Always following the washing instructions on the item of clothing if present. If a fabric conditioner or anti-static agent is used, follow the manufacturer's instructions for use of this product. Remove washing that it is already dry. This will reduce drying time for remaining washing. -
Page 25: Drying Programmes
DRYING PROGRAMMES The drying cabinet is equipped with two automatic programmes for the drying process: NORMAL DRY EXTRA DRY The programmes automatically close the drying process when the fabrics are dry. SELECTION OF DRYING PROGRAMME NORMA DRY – Used for drying of items of normal thickness. ... -
Page 26: Starting Drying Programme
OPERATION STARTING DRYING PROGRAMME LAST USED DRYING PROGRAMME Press the on/off switch to the “ON” position - Indicated by the display lighting up and showing the last run programme. If you want this, press START/STOP. Or select another drying programme by stepping through with the buttons ARROW UP or ARROW DOWN. -
Page 27: Ending Drying Programme
END OF PROGRAMME When the cool-down period has ended, the drying process is finished, and the “end” display shows the text (flashing). When the START/STOP button is then pressed, the current programme ends and the display shows the last used programme. _____________________________ ____________________________ In standby mode the display goes off after... -
Page 28: Setting Of Drying Programme
SETTING OF DRYING PROGRAMME There are ways of optimising the two automatic programmes of the drying cabinet for best possible results. The setting is adjusted on the control panel for the programme concerned. Adjustments must be made if it is found that the ... -
Page 29: Procedure
PROCEDURE Setting to optimise the drying cabinet's automatic programme is done using the buttons on the control panel when the drying cabinet is in programming mode. PROGRAMMING MODE Make sure that the main ON/OFF switch on the drying cabinet is turned off. The ... -
Page 30: Parameter List
SETTING OF DRYING PROGRAMME PARAMETER LIST Parame- Name Factory Designates pre-set value value P105 Language 1=Swedish Setting see page 10 P115 Child lock 0 = Child lock OFF On/Off 1 = Child lock ON P2071 Extra dry Control EXTRA DRY drying programme P2072 Normal Control NORMAL DRY drying pro-... -
Page 31: Care
CARE CLEANING REPLACEMENT PART _____________________________ If the mains lead for any reason is dam- aged, it must be replaced. A genuine spare part can be obtained from the Do not use high-pressure cleaning. dealer who supplied the cabinet. ____________________________________ _____________________________ ____________________________ Cleaning and maintenance must not be A replacement lead may be installed... -
Page 32: Service
This information can be found on the drying cabinet located inside the cabinet. Identifi cation plate (inside) ASKO DC 7794HP Name of the drying cabinet Article number Serial number (12 digits) The illustration shows the identifi cation plate for the... -
Page 33: Troubleshooting
TROUBLESHOOTING Questions Action The drying 1. Check that the mains lead is connected to a power socket. cabinet is not 2. Check that no fuse has tripped. working. 3. Have you pressed the start button? 4. Is the door closed? 5. - Page 34 Questions Action The display shows 1. Check that the door closes tightly so that the door switch is activated. CLOSE DOOR (Located at the bottom of the cabinet on the cover plate in front of the heat pump unit). 2. If necessary, try to tape the switch in position and check whether the warning on the display disappears.
-
Page 35: List Of Error Codes
LIST OF ERROR CODES Describes relevant error codes for this product. Name Description ERROR 03 Fault on moisture sensor Sensor is outside its measurement range Contact Service. ERROR 04 Max time process Max time for drying process exceeded (pre-set value 240 min can be changed with parameter P 2073). -
Page 36: Technical Data
1930 mm 1945 mm incl. hinge Width 595 mm Depth 665 mm 691 mm, incl. door handle Weight of DC7784HP: 93 kg Weight of DC7794HP: 95 kg Sound level: A-weighted emission sound pressure level is less than 70 dB(A) Leaktightness test: 28 bar This product contains fluorinated greenhouse gases. -
Page 37: Manufacturing Standards
ENERGY CONSUMPTION AND DRYING TIMES IN DRYING OF SPUN LAUNDRY *) Programme Energy consumption D r y i n g Temp. max kWh/kg laundry time NORMAL DRY 90 min 55 °C EXTRA DRY 120 min 55 °C _______________________________ *) Values may vary depending on: - spin speed - temperature, air humidity in the room - air circulation in the room (supply air, exhaust air) - Page 39 427001114 / 03...
- Page 40 Right to make changes reserved. ASKO DC7784HP/ en (02-19) DC7794HP...