Electrical Connections - Asko DC7794 User Manual

INSTALLATION

Electrical connections

The drying cabinet should be
connected to a 230V single-phase 50 -
60 Hz earthed socket.
The drying cabinet is supplied ready for
connection with a cable with an earthed
plug.
The drying cabinet should be
connected using the cable supplied
to an earthed wall socket, and must
not be permanently connected!
The socket should be located where
the plug can be easily disconnected
when required.
Check that the supply current
matches that stated on the rating
plate and that the mains lead is
earthed correctly according to current
standards. We recommend that the
mains lead be fitted with a residual
current device (RCD).
The appliance must be connected to
a dedicated circuit.
The manufacturer cannot be held
liable if the electrical connections are
not carried out as prescribed in this
manual.
21