Emerson Fisher 4320 Instruction Manual page 14

4320 Wireless Position Monitor
D Radio Information
Manufacturer—identifies the manufacturer of the
radio.
Model—indicates the radio model.
Device Revision—indicates the revision level of the
radio.
Hardware Revision—indicates the revision level of
the radio hardware.
Firmware Revision—indicates the revision level of
the radio firmware.
14
Calibrate
Follow the prompts on the Field Communicator to
calibrate the instrument.
Join Device to Network allows you to enter the
Network ID (up to 5−digits) and the Join Key (4 sets
of 8 hexadecimal digits). The Join Key is used for
encrypting the data on the wireless network. The
Network ID and the Join Key must be the same for
all devices connected to a gateway.
The Network ID is shipped with a
default value of 1229 and the Join Key
with a default value of all zeros. These
must be changed prior to use.
Instruction Manual
October 2009
Note