Kero-Sun LC-54 Instruction Manual page 6

Fan heater inverter laser clean
Table of Contents

Advertisement

Available languages

Available languages

FUELING
WARNING:
1. Open the fuel tank lid on the top of heater cabinet and lift out the re-
movable fuel tank. Turn the removable tank upside down and remove
the fuel tank cap.
2. Insert the straight tube of the manual siphon into the jerrycans; insert
the siphon's  exible hose into the removable fuel tank opening.
3. Turn the air vent knob on the top of the siphon clockwise to close the
vent. Start the  ow of kerosene (paraf n) by squeezing the bulb of the
siphon vigorously six or seven times. Once  ow begins, it is no longer
necessary to squeeze the bulb.
4. Check the removable tank fuel gauge while  lling the tank. Stop  lling
by loosening the switch button on top of the pump (turn anti-clock-
wise), once the gauge indicates that the tank is full. Never over ll the
tank, especially not when the fuel is very cold (fuel expands when it
heats up).
NOTE: Be careful to avoid over lling the tank, especially with very cold
kerosene (paraf n). Over ow might occur due to expansion when the
fuel warms up.
5. Remove the siphon carefully, allowing excess kerosene (paraf n) to
drain from the tube back into the jerrycans. Replace fuel tank cap and
tighten it securely. Be sure to wipe away any spilled kerosene (paraf-
 n) from tank and other heater parts.
6. After making sure fuel tank cap is tightly fastened, invert tank and re-
place into heater body.
Use only water-clear kerosene (paraf n).
Never use gasoline or other  ammable
liquids.
ALWAYS extinguish heater before re ll
heater fuel tank.
Fuel heater outside the living area.
6
6
ENGLISH

Advertisement

Table of Contents
loading

Table of Contents