Kero-Sun LC-54 Instruction Manual page 8

TEMPERATURE REGULATION
1. Use the Adjustment keys ( hour /
2. Adjust the temperature using the key on the right (
temperature to a higher setting and the key on the left ( hour ) to
lower the temperature.
3. Until the room temperature has reached the set temperature, the
heater will burn at either high or medium burning mode. When the room temperature reaches
or slightly exceeds the set temperature, the heater will automatically shift to maintain the de-
sired temperature.
NOTE: The standard setting of the heater is 20°C. However, once the set temperature has been
changed the new setting will remain in effect unless changed.
NOTE: Room temperature measurements are taken directly behind the heater. These measure-
ments may not represent the true room temperature.
SAVE OPERATION
SAVE OPERATION
The "SAVE" function allows you to limit the temperature. When this
The " Save" function allows you to limit the set temperature.
function is activated, the heater will automatically switch off, when the
When pressing the "Save" button, the heater will shift to the
room temperature exceeds the set temperarure by 3°C. Subsequently,
minimum burning mode regardless of the set temperature.
when the room temperature has dropped again to the set temperature,
The "Save" mark will be shown in the display. To cancel the
the heater will automatically switch on again. Activate the "SAVE" set-
"Save" function, press the "Save" button once again.
ting by pressing the Save key. The Save indicalor will light up. Switch off
the function by pressing the Save key once again.
NOTE: Without the "SAVE" setting your heater will maintain the set temperature by approximation
as well, by adjusting its heating capacity. "SAVE" is an economy setting, which you can use when,
for instance, you are not present in the room or to keep it frost-free.
min.) to adjust the temperature.
(hour / min. )
▼ ▲
(min.
1 2
9
8
min.) to set the
)
▲
(hour )
▼
ENGLISH