Emergency Message - Kero-Sun LC-54 Instruction Manual

EMERGENCY MESSAGE

In the event that heater should extinguish itself, without any action or your part, you
should look to the digital indicator for any of the following messages.
MESSAGE MESSAGE MEANING
MESSAGE
(Digital Indicator)
(Digital Indicator)
Temperature within the heater too high.
Temperature within the heater too high. Cool-down and re-ignite.
Power interrupted. You can re-ignite the heater.
Power interrupted.
Thermostat is broken or disconnected. Contact your dealer. Thermostat is broken or disconnected. Contact your dealer.
Faulty burner thermistor.
Faulty burner thermistor. Contact your dealer.
Primary flame rod is malfunctioning
and / or dirty.
You have accidentaly activated your safety tip-over switch. You should reset
You have accidentally activated your
this device as described, press the "OFF" button and restart your heater.
safety tip-over switch.
Burner flame has been extinguished
during operation .
Room temperature above 32°C
Room temperature above 32°C.
Failure of blower motor.
Failure of blower motor.
Air filter dirty; or Fuel pump dirty.
The heater has been in operation continuously for a
The heater has been in operation
continuously for a period of 50 hours
automatically. Switch the heater back on.
and has turned itself off automatically.
Out of fuel.
(& blinking FUEL-indicator)
Too little ventilation. Ventilate better.
Too little ventilation.
(& blinking VENT-indicator)
MESSAGE MEAING
lter dirty; or Fuel pump dirty.
50
ll removable fuel tank.
14 12
WHAT TO DO
You can re-ignite the heater.
Contact your dealer.
Contact your dealer.
Yo u s h o u l d re s e t t h i s d e v i c e a s
described, press the ''OFF'' button and
restart your heater.
lter.
Check to see if air filter is clogged with
dust. If so, clean air filter.
Re-ignite the heater.
Contact your dealer.
Clean filter. / Contact your dealer.
Switch the heater
Refill removable tank.
Ventilate better.
ENGLISH
lter