Troubleshooting - Kero-Sun LC-54 Instruction Manual

Fan heater inverter laser clean
Table of Contents

Advertisement

Available languages

Available languages

TROUBLESHOOTING

Should problems arise during operation or ignition, use this chart to determine the cause and the
Should problems arise during operation or ignition, use this chart to determine the cause and the
proper steps to take. Be sure to unplug heater and allow to cool completely before taking correc-
proper steps to take. Be sure to unplug heater and allow to cool completely before taking correc-
tive measures.
tive measures.
PROBLEM
POWER LAMP FAILS
TO TURN ON
NO IGNITION
ODOR
EXTINGUISHED
AFTER IGNITION
POOR COMBUSTION/
NOISY COMBUSTION
If the corrective measures outlined above do not solve the problem, please consult your dealer.
CAUSE
- Disconnected power plug
- Incorrect wiring
- Circuit board malfunction
- Out of fuel
- Clogged air fi lter
- Use of inferior kerosene (paraf-
fi n)
- Incorrect wiring
- Circuit board, ignition heater or
fuel pump malfunction
- Clogged air fi lter
- Spilled kerosene (paraffi n)
- Use of inferior kerosene (paraf-
fi n)
- Excessive room temperature
- Oxygen shortage in room
- Tip-over switch activated
- Water in fuel acceptance fi tting
- Out of fuel
- Flame sensor or fuel pump
malfunction
- High limit switch activated
- Clogged air fi lter
- Loose screws or incorrect as-
sembly
- Incorrect wiring
- Circuit board or fuel pump
malfunction
- Altitude too high
14
16
ENGLISH
SOLUTION
- Plug into 230V AC outlet
- Consult your dealer
- Consult your dealer
- Refuel
- Clean air fi lter
- Remove fuel and refuel using
fresh, clear kerosene (paraffi n)
- Consult your dealer
- Consult your dealer
- Clean air fi lter
- Wipe off any kerosene (paraffi n)
spills from fuel sub tank, remov-
able fuel tank and drip tray
- Remove fuel and refuel using
fresh, water-clear kerosene
(paraffi n)
- Allow room to cool
- Open doors and windows to
ventilate room thoroughly
- Reignite
- Remove fuel and refuel using
fresh, water-clear kerosene
(paraffi n)
- Refuel
- Consult your dealer
- Clean circulation fan cover,
remove any obstructions
- Clean air fi lter.
- Consult your dealer.
- Consult your dealer.
- Consult your dealer.
- Consult your dealer.

Advertisement

Table of Contents
loading

Table of Contents