Leds; Rt Bus Leds; S1 - S2 - LinMot E1400-GP-QN Installation Manual

E1400 V1 Rev. D Installation Guide
6.17

LEDs

LEDs State Display
Green
Yellow
Yellow
Red
6.18

RT BUS LEDs

RT Bus LEDs RT Bus State Display
Green
Red
The use of these LEDs depends on the type of fieldbus which is used. Please see the corresponding
manual for further information.
6.19

S1 - S2

S1 - S2 Address Selectors
S1 (5..8)
S2 (1..4)
The use of these switches depends on the type of fieldbus which is used. Please see the corresponding
manual for further information.
Page 16/24
24V Logic Supply OK
Motor Enabled / Error Code Low Nibble
Warning / Error Code High Nibble
Error
OK
Error
Bus ID High (0 ... F). Bit 5 is the LSB, bit 8 the MSB.
Bus ID Low (0 ... F). Bit 1 is the LSB, bit 4 the MSB.
www.LinMot.com
®
NTI AG / LinMot