fantastic furniture ADAPT Manual page 8

Step 7
You will need
4 x Wedges 4 x Screws
(H16) (H17)
Phillips head
screwdriver
Secure Back Panel (P5) in place with 4 x Wedges (H16) using 4 x Screws (H17).
Tighten Screws using a Phillips head screwdriver.
Step 8
You will need
2 x Cam Bolts Phillips head
(H3) screwdriver
Insert 2 x Cam Bolts (H3) into Drawer Front (P6) with a Phillips head screwdriver.
Step 9
You will need
2 x Cam Nuts
4 x Small
(H4)
Dowels (H2)
Flat head
screwdriver
Insert 4 x Small Dowels (H2) into the holes of Drawer Front (P6) as shown.
Insert 2 x Cam Nuts (H4) into the holes of Drawer Sides (P7, P8).
Rotate the Cam Nuts so the arrows point towards the in-coming Cam Bolts.
Push Drawer Sides (P7, P8) into place.
Tighten the Cam Nuts using a Flat head screwdriver.
www.fantasticfurniture.com.au
H3
(P6)
(P7)
H4
H2
H2
(P6)
(P5)
H3
(P8)
H2
H4
H2
H16
H17
PAGE 8