fantastic furniture ADAPT Manual page 10

Step 13
You will need
5 x Cam Bolts Phillips head
(H3) screwdriver
Insert 5 x Cam Bolts (H3) into Drawer Front (P11) with a Phillips head screwdriver.
Step 14
You will need
5 x Cam Nuts
2 x Small
(H4)
Dowels (H2)
Flat head
screwdriver
Insert 2 x Small Dowels (H2) into the holes of Drawer Front (P11) as shown.
Insert 5 x Cam Nuts (H4) into the holes of Drawer Sides (P12, P13) and Support Rail (P15).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push Drawer Sides (P12, P13) and Support Rail (P15) into place and tighten the cam nuts.
Step 15
Slide Drawer Base (P9) into the grooves of Drawer Sides (P12, P13).
www.fantasticfurniture.com.au
H3
H3
(P13)
H4
H4
(P9)
(P13)
H3
H3
H3
(P11)
(P15)
(P12)
H4
H4
H2
H2
(P11)
(P12)
H4
PAGE 10