fantastic furniture ADAPT Manual page 11

Step 16
You will need
2 x Small 5 x Long
Dowels (H2) Screws (H14)
2 x Metal Bars Phillips head
(H15) screwdriver
Insert 2 x Small Dowels (H2) into Support Rail (P15).
Insert one side of 2 x Metal Bars (H15) to the grooves of Drawer Front (P13),
Attach Drawer Back (P14) to Drawer Sides (P12, P13) and Support Rail (P15)
with 5 x Long Screws (H14), make sure that the groove lines up the whole way
around the drawer and another side of Metal bars (H15).
Tighten Screws using a Phillips head screwdriver.
Step 17
You will need
1 x DL Runner 1 x DR Runner
(H9)
(H8)
6 x Small
Phillips head
Screws (H5)
screwdriver
Step 18
You will need
4 x Round
1 x Large
Screws (H13)
Wheel (H12)
Phillips head
screwdriver
www.fantasticfurniture.com.au
H15
H5
H5
H9
Attach 1 x DL Runner (H8) to Left Drawer Side (P12) and
1 x DR Runner (H9) to Right Drawer Side (P13) with 6 x Small Screws (H5).
Attach 1 x Large Wheel (H12) to Support Rail (P15) with
4 x Round Screws (H13) using a Phillips head screwdriver.
H14
(P14)
H14
H14
H14
H2
H15
(P13)
(P15)
H5
(P13)
H13
H13
H12
(P15)
H14
(P12)
(P12)
H8
H5
H5
H5
PAGE 11