fantastic furniture ADAPT Manual page 6

Step 3
You will need
4 x Cam Nuts
4 x Dowels
(H4)
(H1)
Flat head
screwdriver
This is how a cam nut works ........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Insert 4 x Dowels (H1) into Side Panels (P2, P3).
Insert 4 x Cam Nuts (H4) into the holes of Side Panels (P2, P3).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push Top Panel (P1) into place and then tighten the cam nuts using a Flat head screwdriver.
Step 4
Carefully turn the frame over to an upright position.
Slide Back Panel (P5) in through the grooves of Side Panels (P2, P3) as shown.
www.fantasticfurniture.com.au
H1
H1
(P2)
(P5)
(P3)
H1
H4
H1
(P3)
(P2)
PAGE 6