Digigram PYKO-out User Manual page 4

INFORMATION FOR THE USER
This equipment has been tested and found to comply with the limits for a CLASS B digital device, pursuant to Part 15 of the
FCC Rules and with the following European and international Standards for:
In order to guarantee compliance with the above standards in an installation, the following must be done:
· the provided cables must not be modified.
· additional cables used must have their respective shield connected to each extremity.
The limits specified in the standards are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
* reorient or relocate the receiving antenna.
* increase the separation between the equipment and the receiver.
* connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* consult the dealer or an experienced audio/television technician for help.
Note ​ :
Connecting this device to peripheral devices that do not comply with CLASS B requirements or using an unshielded
peripheral data cable could also result in harmful interference to radio or television reception. The user is cautioned
that any changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate this equipment. To ensure that the use of this product does not contribute to interference, it
is necessary to use shielded I/O cables.
This device has been tested and found to comply with the following standards:
● International: CISPR22 (2005) Class B.
● Europe: EMC 2004/108/CE specifications.
● United States: FCC Rules-Part 15-Class B (digital device).
In order to guarantee compliance with the above standards in an installation, the following must be done:
● the provided cable must not be modified.
● additional cables used must have their respective shield connected to each extremity.
PYKO-out: Professional IP audio endpoint
4