Using Pyko-Out With Audio Manager; Pyko- Out In Stand Alone Mode - Digigram PYKO-out User Manual

Professional ip audio endpoint

Hide thumbs Also See for PYKO-out:

Hello, I am your AI assistant. How can I help you?

Table of Contents

PYKO-out: Professional IP audio endpoint

6.14. Using PYKO-out with Audio Manager

If you use your PYKOs with Audio Manager, you will first have to either assign an IP address through

the web pages or turn the DHCP on (Audio Manager will then automatically assign an IP address).

Audio Manager Server will detect this address and allow the Audio Manager Client to configure it.

To be detected by Audio Manager, the TCP control port has to be set to "40002", the UDP listening port

to "40004". These are also the values defined in the factory configuration.

You may decide that Audio Manager is to control PYKO-out only in part. In this case, use the PYKO-out

html pages to configure the device accordingly (cf. on-line help of the pages).

For more details on managing PYKO through Audio Manager, please refer to its on line help.

6.15. PYKO-out in 'stand-alone' mode

You can now access the embedded html pages that will allow you to configure the device.

Table of Contents

Do you have a question about the PYKO-out and is the answer not in the manual?