Appendix B: Using The Internal Usb Port - Digigram PYKO-out User Manual

Professional ip audio endpoint

Hide thumbs Also See for PYKO-out:

Table of Contents

9. APPENDIX B: USING THE INTERNAL USB PORT

These settings shall be executed by qualified personnel only!

Tools required:

● a #1 Pozidriv

● an ESD-preventive wrist

Electrostatic discharge (ESD) can damage several components on

board. To avoid such damage in handling the board, take the

following precautions:

Bring the device and everything that contacts it to ground potential

providing a conductive surface and discharge paths. As a minimum, observe these precautions:

● Disconnect all power and signal sources.

● Place the device on a grounded conductive work surface.

● Ground yourself via a grounding wrist strap or by holding a grounded object.

● Ground any tools that will contact the device.

● Unscrew the two flat-head Pozidriv screws

cabinet.

● Insert the USB stick into the port provided for this purpose.

PYKO-out: Professional IP audio endpoint

screwdriver

strap

counterclockwise and open the

the

Table of Contents

Need help?

Do you have a question about the PYKO-out and is the answer not in the manual?