Rear Windscreen Wiper Controls - MG RX8 Manual

Rear Windscreen Wiper Controls

The rear wipers and washers will only operate when the
ignition switch is in position "ON". Operate the lever to
select different wiping modes:
• Intermittent wipe (1)
• Wash and wipe (2)
• Wash and wipe (3)
• Wiper delay switch (4)
Instruments and Controls
Intermittent position
If the rear wiper switch is turned to intermittent wipe (1),
the rear wiper will operate. It will complete 3 continuous
wipes before changing to intermittent mode. The interval
between the wipes can be increased/decreased via the
wiper delay switch (4).
Wash and wipe
If the rear wipe and wash (2) is selected, the rear wiper and
washer will operate together, and the rear wiper will move
fast. If the switch is released to intermittent wipe (1), the
rear washer will stop operating.
If the rear wipe and wash (3) is selected, the rear wiper
and washer will operate together. If the switch is released
to off position, the rear wiper and washer stop operating.
Note:
operations will be disabled.
Note: After the front windscreen wipers are switched
on, if the shift lever is in R position, the rear wiper will
operate.
When the tailgate is opened, rear wiper
1
45