fantastic furniture Java Console Table Manual page 11

Step 9
You will need
6 x Large Cam Flat Head
Nuts (H2) Screwdriver
Position top panel (P1)
onto panels (P3 x 2, P4) as shown.
Make sure the groove in
top panel (P1) is on the same side
as the back panel (P5).
Insert 6 x large cam nuts (H2)
into panels (P3 x2, P4).
Rotate the cam nuts so the arrows
point towards the incoming cam bolts
and turn clockwise to lock
with a flat head screwdriver.
Step 10
You will need
4 x Screws
4 x Back Panel
16mm (H6) Connectors (H7)
Phillips Head
Screwdriver
If necessary, gently adjust the top panel (P1) sideways in either direction
until XX and YY are equal.
Holding it in place, fix 4 x back panel connectors (H7) to assembled unit
with 4 x screws (H6) as shown, using a phillips head screwdriver.
fantasticfurniture.com.au
H2
H2
(P3)
Two People
Required
(P1)
H2
H2
(P4)
H2
(P3)
H2
Page 11