fantastic furniture Java Console Table Manual page 9

Step 6
You will need
6 x Screws
2 x Slide
12mm (H18)
Tracks (H19-1)
Phillips Head 4 x Dowels
Screwdriver
30mm (H3)
Mallet
Important Note:
The screws need to be fixed
into di erent holes compared
to the other side.
H19-1
Please fasten the screws through
these holes for this step
Insert 4 x dowels (H3) into divider panel (P4) as shown.
If needed use a mallet to gently tap the dowels into place.
Attach 1 x slide track (H19-1) onto the side of divider panel (P4) without cam nut holes
using 3 x screws (H18) as shown.
Turn divider panel (P8) over.
Attach 1 x slide track (H19-1) onto divider panel (P4) with 3 x screws (H18) as shown,
using a phillips head screwdriver.
It is important to note that the screws on this side need to be fixed into di erent holes
compared to the slide track (H19-1) on the other side of the divider panel (P4).
fantasticfurniture.com.au
Note the position
of the rubber stopper
H19-1
H19-1
Please fasten the screws through
these holes for this step
H18
(P4)
H3
H3
H18
H18
(P4)
H3
H18
H18
H3
H19-1
H18
H19-1
H19-1
Page 9