fantastic furniture Java Console Table Manual page 10

Step 7
You will need
6 x Large Cam Flat Head
Nuts (H2) Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Position panels (P3 x 2, P4) onto bottom panel (P2) as shown.
Make sure the grooves in panels (P2, P3) are on the same side.
Insert 6 x large cam nuts (H2) into panels (P3 x2, P4).
Rotate the cam nuts so the arrows point towards the incoming
cam bolts and turn clockwise to lock with a flat head screwdriver.
Step 8
Slide back panel (P5) into the grooves
on side panels (P3) and bottom panel (P2).
fantasticfurniture.com.au
(P3)
H2
H2
(P2)
Laminated
edge
(P3)
(P4)
H2
H2
H2
H2
(P5)
(P3)
(P2)
(P3)
Page 10